This paper presents a 4th order CLCL resonant converter which is suitable for constant current power supply applications. This converter is designed with Immittance characteristic with two inductors and two capacitors in resonant network. A detailed analysis and design process of a 200w converter as a constant current supply have been provided and simulation results are verified with results of...

Abstract – In this paper an Improved Zero Voltage Zero Current Pulse Width Modulation Forward converter which employs a simple resonance snubber circuit is introduced. A simple snubber circuit consists of a capacitor, an inductor and two diodes. In proposed converter, switch Q1 operates at ZCS turn-on, and ZVS turn-off conditions and all-passive semiconductor devices operate at ZVZCS turn-on an...

A novel single-stage AC/DC converter is proposed in this letter. The converter is designed by integrating a sepic circuit and a flyback circuit, the circuit work in the quasi-resonance state, and the switch is turned on in the zero voltage switching (ZVS) state, which decreased the switching losses of the converter Streszczenie. Opisano nowy konwerter AC/DC. Układ pracuje w stanie quasi-rezonan...

This work presents a novel highly efficient and low-stress battery charger with a resonant switch converter— based on resonance and zero-voltage-transition soft-switching theory—that reduces defects associated with high voltage and high current stresses caused by the resonance of traditional resonant circuits. The novel battery charger meets the requirement that all circuit components must oper...

Initiation of a plasma conduction state requires a relatively large voltage to ionize the gas. A new version of the series resonant converter is proposed that uses the magnetizing inductance of the transformer for resonance. This converter is not suitable for most power supply applications, but the unique load characteristics associated with plasma loads make this type of converter well suited ...

Multi-port converter with three active full bridges, two series-resonant tanks and a Multi-winding transformer is proposed. It uses a single power conversion stage with high-frequency link to control power flow between batteries, load and a renewable source such as fuel cell. The converter has capabilities of bidirectional power flow in the battery and the load port. Use of series-resonance aid...

A continuous control set model predictive power strategy for an indirect matrix converter is proposed in this paper. The load reactive power, the active and input are controlled simultaneously. This can obtain output waveforms with fixed switching frequency. Additionally, optimal sequence to simplify commutations of converter. To suppress filter resonance, damping method proposed. Experimental ...

A new soft recovery (SR) quasi-resonant converter (QRC) having a multiple-order folding snubber network(MFSN) is introduced. It is obtained by combining a normal QRC with a folding snubber network of which the surrounding components are composed of passive devices only (diodes and capacitors). The reverse recovery loss of the main rectifier diode is eliminated by this method utilizing multiple ...

This paper presents implementations of a nonisolated, high voltage gain DC-DC converter. High voltage gain is achieved due to inclusion of resonance and transformer in the circuit. The performance of this converter is compared with two similar topologies namely coupled inductor-switched capacitor step-up converter and coupled inductor step-up converter. The proposed prototype is designed using ...